================================================
FOR <filename>.zip
================================================
	1. Save this file to your computer.

	2. extract the files to a external storage device (such as a USB stick or CD).
	   (Note: The USB stick doesn't have to be bootable, but has to be formatted with the FAT/FAT32 file system.)

	3. Boot to Build-In UEFI Shell, goes to file location and type flash.nsh BIOSname.###.

	4. Do not interrupt the process until the flashing is complete.

	5. After you see the message of BIOS has completed the update, unplug the AC, clear the CMOS and plug in the AC and power on the system.

	6. Go to the BIOS setup screen and press F9 to load the default and press F10 to save and exit.
	
